500+ lb of clamping force, machined from billet
Two CNC-machined blocks of 6061 T6 billet aluminum produce 500+ lb of clamping force — enough to lock onto virtually any shape, size, or structure.
Made in USA
Lifetime warranty
CNC machined
Free Shipping
CONNECT AIM
CLAMP-ON RIFLE REST. NO TRIPOD NEEDED.
Connect Aim is built around our Mount Anywhere clamping system — a modular clamp-on platform that mounts virtually anywhere structural. The V-shaped TPU cradle on top sets your rifle in a non-marring, rock-solid hold, ready to aim without legs, without bolts, without makeshift props. Built for the bench, the blind, the side-by-side, and every structure in between. The extra hand you didn't know you needed.
Two offset positions. Every angle you need.
Two offset bar mounting holes — one on the bottom, one on the rear. Swap between them for horizontal or vertical mounting, or to find the right angle.
Length, angle, freedom
Tight-tolerance CNC aluminum Pro Bar — 13″ to 18″ of extension and 360° of rotation at the connection points. Adjust to fit any seated, standing, or vehicle-mounted shooting position, then lock the bar in place. Same precision-fit principle as the rest of the Connect system: full surface contact when locked, less force to secure.
One shim, three jobs
Stores around the offset bar, drops into either jaw to clamp flat surfaces at any thickness, or shims smaller and odd-shaped structures.
Real leverage in awkward positions
Oversized 3/8″ ratcheting handle on the main clamp — designed for high-leverage tightening when you're reaching around a roll cage, wedged into a blind, or working off a fencepost. Sized to never compete with the smaller adjustment knobs elsewhere on the unit.
Where your rifle sits. And stays.
High-density TPU insert in a V-shape — non-marring, rubber-like grip that cradles your rifle regardless of barrel diameter or stock shape. Bolts in securely; replaceable when it eventually wears. Built for the rest of the day: the long sit in the blind, the consistent zero at the range, the seat-of-the-pants ATV setup when the shot opens up.
How it works
CONNECT
AIM
Fire
Built for the Hunt. Trained for the Range.
One rest. Every position. The structures already around you.
Quiet in the Blind
Lock into position without rattling your setup or scaring off game. Low profile, dead silent. The V-shape cradles your rifle steady through the long wait — clamp once, hold all day.
Bench-Rest at the Range
Consistent zero, smooth scope adjustments, repeatable rest position. Aim gives you bench-rest stability on any range bench, on your tailgate, on a fencepost — wherever you're zeroing today.
Locked to Your UTV
Clamp to your roll bar, grill guard, or A-pillar. The Aim turns your side-by-side or ATV into a stable rifle platform for varmints, predators, or the shot that opens up when the terrain doesn't cooperate.
Anywhere Structural
Fencepost, benchtop, tailgate, treestand rail, blind window frame — if it's structural and within the clamp's range, the Aim mounts to it. Replace your shooting sticks, your bag rest, your makeshift props. One rest, every position.
Holds Your Rifle. Steady.
The V-shaped TPU cradle cradles any standard rifle — bolt-action, AR-platform, lever-action — without marring stock or barrel.
Any Stock, Any Caliber
The V-cradle's geometry accommodates most rifle stocks — synthetic, wood, polymer, fluted barrels, heavy-profile barrels. Sets your rifle in a consistent rest position regardless of make or model.
Non-Marring TPU
High-density TPU contact surface — won't scratch, dent, or leave marks on finished stocks, painted barrels, or anodized rails. The grip is rubber-like enough to hold the rifle steady; soft enough to leave it pristine.
Replaceable, Not Disposable
The V-insert bolts in. When it eventually wears from years of use, swap it out for a new one — same as every other wear part in the Connect system. Built to be maintained, not replaced.
Where Tripods Stop, the Connect Begins
Tripods have their place — but not when you're in a blind, on an ATV, against a fencepost, or wherever the day takes you.
No Legs in the Way
No tripod sprawl. Connect clamps to what's already there — your vehicle, your bench, your blind rail. Less setup time. Less ground to lose.
Faster Setup, Quieter Movements
No fumbling, no clanking tripod legs, no makeshift props. Clamp on, drop your rifle in the V-cradle, lock down. Smooth and fast — and when game is in earshot, dead silent.
Smaller Footprint Than Your Bag
Fits in your range bag at 2.3 lbs and 14″ × 6″ × 2″. Doesn't bulk up your kit. Travels with the gear, deploys when you need it, packs away when you don't.
Why It Works
Six things it does that other rifle rests don't.
Clamps Anything Structural
Round 0.5–2.5", square or rectangular 0.5–2.7", flat up to 2.7". Roll bars, vehicle racks, blind rails, range benches, tripod legs, and more.
Adjustable on Every Axis
Multi-axis configuration: Pro Bar extends 13″–18″, rotates 360° at the connection. Clamp positions horizontal or vertical. Fine-tune your setup for sitting, standing, or vehicle-mounted shooting positions.
Replaceable Parts, Every Single One
From hardware to the TPU V-cradle and everything in between — built to be maintained, not replaced.
Made in the USA
CNC-machined in the USA from 6061 T6 billet aluminum. Assembled and shipped from our headquarters in Bentonville, Arkansas. Lifetime warranty.
Why It's Built This Way
The honest version. Open the dropdowns if you want to see what's underneath the marketing.
Why Our Clamp Works
- CNC-machined from solid blocks of 6061 aluminum
- No welds, cast points, or weak joints
- V-shaped jaws create opposing force vectors — not just pressure
- Strong hold even with partial contact
Translation: works where other clamps fail.
Precision Fit & Stability
- Tight-tolerance telescoping bar (±.002")
- Full surface contact when locked — not a single pinch point
- Requires less force to secure
Translation: precision replaces brute force.
Why the V-Cradle Works
- High-density TPU — rubber-like grip without the give of softer foams or rubber pads
- V-shape geometry accommodates virtually any rifle stock and barrel profile
- Bolts in securely — no slipping under recoil, no shifting between shots
- Replaceable when it eventually wears, so the Aim outlives the cradle
Translation: a rest that doesn't move when you don't want it to.
Hardware That Matters
- The clamp's oversized 3/8" barrel nut for deep thread engagement
- Glass-filled nylon ratcheting handle for real leverage in awkward positions
- Zinc-plated rod paired with stainless barrel nut to prevent galling and seizing under repeated load
Translation: the parts most clamps cut corners on.
Pivot & Adjustment Explained
- Pro Bar telescopes 13″–18″ and rotates 360° at the connection — adjust to fit your shooting position
- Friction-hold pivot on the Pro Bar's connection points: tighten the hand knob to lock the angle
- Single lockout design — appropriate for the rifle-rest use case where you set the angle once per shooting session
Translation: dial in. lock down. shoot.
Built for Long-Term Ownership
- Replaceable components — every single one
- In-house parts support, USA-stocked
- Lifetime warranty on Connect
Translation: built to be maintained, not replaced.
Adjust It. Then Lock It.
Three adjustment points get you to position: the clamp on the structure, the Pro Bar's telescoping length, and the Pro Bar's 360° rotation. Loosen each to find your shooting position — sitting, standing, vehicle-mounted, whatever the day requires — then lock them all back down. The V-cradle on top is fixed; the rifle goes in, the day begins.
Loosen, position, lock — and your rifle rest stays where you put it.
Built By People Who Use It
We didn't outsource the design and we didn't water it down. The Hub got machined, broken, redesigned, and re-tested in the same shop in Bentonville where it ships from now. Every part is replaceable. Every spec is what we'd want on our own rigs. That's the whole pitch.
— Squires (Founder)
Altangle Tools • Bentonville, Arkansas
Connect Aim
€251,95
A clamp-on rifle rest built around our Mount Anywhere clamping system. V-shaped…Show less
A clamp-on rifle rest built around our Mount Anywhere clamping system. V-shaped TPU cradle on top sets your rifle in a non-marring, rock-solid hold. No tripod legs, no bolts, no makeshift props. The extra hand you didn't know you needed.
- Locks on with 500+ LBS of clamping force
- V-shaped TPU cradle — non-marring, replaceable
- Pro Bar 13″–18″ telescoping + 360° rotation
- 2.3 lbs, fits in your range bag
- Built for bench, blind, side-by-side, fencepost
Ships next business day
LIFETIME WARRANTY
FREE & FAST SHIPPING
30 DAY MONEY BACK GUARANTEE
Buy it, try it, and send it back if it's not a fit. We're confident in our products, but given the versatility, the best way to determine its value to you is putting it to use and deciding for yourself. That's why we offer flexible returns.
QUESTIONS? YOU CAN CALL US
We're a small team, and you'll always talk to one of us directly. Email anytime, or call the number included with your order.
Explore other configurations
Specifications
CNC machined aluminum
Adjustable on every axis.
Locks on with 500+ lbs of clamping force
Capable of supporting 55+ lbs
Recommended load varies by application and setup.
6061 T6 billet aluminum, anodized
Fits any side-by-side or ATV
Compatible with all major UTV and ATV manufacturers: Polaris, Can-Am, Honda, Yamaha, Kawasaki, and more. *See compatibility drop down below for more details.
What's in the box
- Connect Hub
- Hub Mounting Pad
- Flat Mount Insert
- 3/8 Flange Head Screw
- NOT INCLUDED: Ball Head & other mounting accessories.